Low-Voltage Landscape Lighting Basics for Putting Greens
Quick answer
Low-voltage landscape lighting uses a transformer to step household power down for outdoor fixtures. For a putting green, that means one weather-protected transformer, buried low-voltage cable to each light, sealed connections, and a timer or photocell. Follow manufacturer instructions and use a qualified person where code requires.
The basic system
- Transformer: plugs into a GFCI-protected outdoor outlet and supplies low-voltage power.
- Cable: runs from the transformer to each fixture, usually buried shallowly or tucked under edging.
- Fixtures: cup lights and any perimeter lights.
- Controls: timer, photocell or smart switch.
Sizing and voltage drop (general)
Transformers are sized by the total load of the fixtures connected to them, with some headroom. Long cable runs lose voltage, which can dim the farthest lights; manufacturers publish guidance on cable gauge and run length. Use the guidance for the specific fixtures and transformer you buy.
Connections that last outdoors
Moisture is the main enemy of outdoor wiring. Use connectors rated for direct burial or outdoor use, keep connections above standing water where possible, and avoid splicing inside the cup area unless the fixture instructions call for it.
Safety and codes
Safety: follow the fixture manufacturer's instructions, call 811 before digging, and have low-voltage wiring connections made by a qualified person where local code requires it.
Local electrical codes vary. If you are unsure, hire a licensed electrician or qualified landscape lighting installer.
Light your backyard green.
Cup, LED fixture, wiring, drainage hardware, flagstick and flag in one kit. Packages of 1, 3, 4 or 6.
See the LED Golf Cup Light KitRelated guides
General information only. Always follow the instructions supplied with your products and local codes.